IKORCCJATF

United Brotherhood of Carpenters and Joiners of America

Jump Start Your Future Today! Start Your Application

Newburgh Courses

January

  • January 7th – 10th BIM Concepts Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Andy Carr
  • January 14th, 15th, & 16th Rigging Refresher Mon – Wed, 12 Hours, 5pm – 9pm Test Thursday AM, Instructor: Sid Nelson
  • January 14th – 17th Optics Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Justin Freeman
  • January 28th – 31st SketchUp Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Andy Carr
  • January 28th & 29th First Aid/CPR/AED Mon & Tues, 8 Hours, 5pm – 9pm, Instructor: Sid Nelson
  • January 28th & 29th Pito (Forklift) Mon & Tues, 8 Hours, 5pm – 9pm, Instructor: Mike Dugan
  • January 30th & 31st Aerial Lift Wed & Thurs, 8 Hours, 5pm – 9pm, Instructor: Mike Dugan

February

  • February 4th, 5th, & 6th OSHA 10 Mon – Wed, 10 Hours, 5pm – 9pm, Instructor: Michael Swope
  • February 11th – 14th Reading Mechanical Prints Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Pat House
  • February 23rd Scaffold Refresher Sat, 8 Hours, 8am – 4:30pm, Instructor: Chris Skidmore

March

  • March 4th, 5th, & 6th Rigging Refresher Mon – Wed, 12 Hours, 5pm – 9pm Test Thursday AM, Instructor: Sid Nelson
  • March 4th – 7th Intro to Electronic Prints Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Andy Carr
  • March 4th – 7th Welding Mon – Thurs, 16 Hours, 4pm – 8pm, Instructor: Michael Swope
  • March 11th – 14th Shaft Alignment Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Justin Freeman
  • March 18th – 21st Conveyor/Monorail Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Pat House
  • March 23rd Scaffold Refresher Sat, 8 Hours, 8am – 4:30pm, Instructor: Chris Skidmore
  • March 25th – 29th Intro to Rivet Mon – Thurs, 16 Hours, 8pm – 9pm, Instructor: Andy Carr

April

  • April 1st & 2nd First Aid/CPR/AED Mon & Tues, 8 Hours, 5pm – 9pm, Instructor: Andy Carr
  • April 1st – 4th, & 6th GE Gas Fam/Hytorc Mon – Thurs & Sat, 24 Hours, 5pm – 9pm & Sat 7:30am – 4pm, Instructor: Mike Dugan
  • April 1st – 5th Scaffold Mon – Fri, 40 Hours, 7:30am – 4pm, Instructor: Sid Nelson
  • April 1st – 4th OSHA 30 Mon – Thurs, 30 Hours, 7:30am – 4pm, Instructor: Michael Swope
  • April 3rd & 4th Aerial Lift Weds & Thurs, 8 Hours, 5pm – 9pm, Instructor: Andy Carr
  • April 15th – 19th Welding Mon – Fri, 40 Hours, 7:30am – 4pm, Instructor: Michael Swope
  • April 27th Scaffold Refresher Sat, 8 Hours, 8am – 4:30pm, Instructor: Chris Skidmore
  • April 29th – May 2ndIntro to NavisWorks Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Andy Carr
  • April 29th – May 1stRigging Refresher Mon – Wed, 12 Hours, 5pm – 9pm Test Thursday AM, Instructor: Sid Nelson

May

  • May 20th – 23rd Optics Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Pat House
  • May 25th Scaffold Refresher Sat, 8 Hours, 8am – 4:30pm, Instructor: Chris Skidmore
  • May 27th – 30th Shaft Alignment Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Justin Freeman

June

  • June 3rd – 6th Robotic Layout Instruments Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Andy Carr
  • June 10th – 13th Machinery Installation Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Justin Freeman
  • June 17th, 18th & 19th Rigging Refresher Mon – Wed, 12 Hours, 5pm – 9pm, Instructor: Sid Nelson
  • June 17th – 20th Conveyor/Monorail Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Pat House
  • June 22nd Scaffold Refresher Sat, 8 Hours, 8am – 4:30pm, Instructor: Chris Skidmore
  • June 24th – 27th Bim Concepts Mon – Thurs, 16 Hours, 5am – 9pm, Instructor: Andy Carr

July

  • July 1st & 2nd First Aid/CPR/AED Mon – Thurs, 8 Hours, 5pm – 9pm, Instructor: Andy Carr
  • July 20th Scaffold Refresher Sat, 8 Hours, 8am – 4:30pm, Instructor: Chris Skidmore
  • July 22nd – 25th Procore Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Andy Carr
  • July 21st – 24th OSHA 10 Mon – Wed, 10 Hours, 5pm – 9pm, Instructor: Michael Swope
  • July 22nd & 23rd Pito (Forklift) Mon & Tues, 8 Hours, 5pm – 9pm, Instructor: Mike Dugan
  • July 24th & 25th Aerial Lift Wed & Thurs, 8 Hours, 5pm – 9pm, Instructor: Mike Dugan

August

  • August 12th – 15th & 17th GE Gas Fam/Hytorc Mon – Thurs & Sat, 24 Hours, 5pm – 9pm & Sat 7:30am – 4pm, Instructor: Mike Dugan
  • August 12th, 13th & 14th Rigging Refresher Mon – Wed, 12 Hours, 5pm – 9pm Test Thursday AM, Instructor: Sid Nelson
  • August 12th – 15th SketchUp Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Andy Carr
  • August 24th Scaffold Refresher Sat, 8 Hours, 8am – 4:30pm, Instructor: Chris Skidmore
  • August 26th – 29th OSHA 10 Mon – Wed, 10 Hours, 5pm – 9pm, Instructor: Andy Carr
  • August 26th & 27th Scaffold Refresher Mon & Tues, 8 Hours, 5pm – 9pm, Instructor: Michael Swope

September

  • September 9th – 12th Optics Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Pat House
  • September 28th Scaffold Refresher Sat, 8 Hours, 8am – 4:30pm, Instructor: Chris Skidmore
  • September 30th – October 1st Fall Protection Mon – Tues, 8 Hours, 5pm – 9pm, Instructor: Andy Carr
  • September 30th – October 2nd Rigging Refresher Mon – Wed, 12 Hours, 5pm – 9pm Test Thursday AM, Instructor: Sid Nelson

October

  • October 2nd & 3rd ICRA Best Practices Refresher Wed & Thurs, 8 Hours, 5pm – 9pm, Instructor: Andy Carr
  • October 7th – 11th Welding Mon – Fri, 40 Hours, 7:30am – 4pm, Instructor: Michael Swope
  • October 7th – 10th Shaft Alignment Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Justin Freeman
  • October 14th – 18th Scaffold Mon – Fri, 40 Hours, 7:30am – 4pm, Instructor: Sid Nelson
  • October 19th Scaffold Refresher Sat, 8 Hours, 8pm – 4:30pm, Instructor: Chris Skidmore
  • October 28th – 31st Advanced Int. Sys Layout Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Andy Carr

November

  • November 4th, 5th & 6th OSHA 10 Mon – Wed, 10 Hours, 5pm – 9pm, Instructor: Michael Swope
  • November 11th – 14th Machinery Installation Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Justin Freeman
  • November 16th Scaffold Refresher Sat, 8 Hours, 8am – 4:30pm, Instructor: Chris Skidmore
  • November 18th – 23rd ICRA Mon – Thurs/Sat, 24 Hours, 5pm -9pm / 7:30am – 4pm – Sat, Instructor: Sid Nelson
  • November 18th – 21st Conveyor/Monorail Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Pat House

December

  • December 2nd – 5th Metal stud Framing Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Andy Carr
  • December 2nd & 3rd First Aid/CPR/AED Mon & Tues, 8 Hours, 5pm – 9pm, Instructor: Sid Nelson
  • December 7th Scaffold Refresher Sat, 18 Hours, 8am – 4:30pm, Instructor: Chris Skidmore
  • December 9th – 12th & 14th GE Gas Fam/Hytorc Mon – Thurs & Sat, 24 Hours, 5pm – 9pm, Sat 7:30am – 4pm, Instructor: Mike Dugan
  • December 16th – 19th OSHA 30 Mon – Thurs, 30 Hours, 7:30am – 4pm, Instructor: Michael Swope
  • December 16th & 17th Pito (Forklift) Mon & Tues, 8 Hours, 5pm – 9pm, Instructor: Mike Dugan
  • December 18th & 19th Aerial Lift Wed – Thurs, 8 Hours, 5pm – 9pm, Instructor: Mike Dugan

Paducah

January

  • January 28th – 31st Machinery Installation Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Pat House

February

  • February 19th & 21st Scaffold Refresher Tues & Thurs, 8 Hours, 5pm – 9pm, Instructor: Cary Hargrove
  • February 25th – March 1st OSHA 30 Mon – Fri, 30 Hours, 7:30am – 4pm, Instructor: Sid Nelson

March

  • March 30th Aerial Lift Sat, 8 Hours, 7am – 3:30pm, Instructor: Cary Hargrove

April

  • April 8th – 13th Blueprint Reading Mon – Thur & Sat, 24 Hours, Mon – Thurs 5pm – 9pm, Sat 7am – 3:30pm, Instructor: Andy Carr
  • April 15th & 16th First Aid/CPR/AED Mon & Tues, 8 Hours, 5pm – 9pm, Instructor: Sid Nelson
  • April 16th, 18th, 20th, 23rd, 25th, 27th, 30th & May 2nd Scaffold Erector Tues, Thurs, Sat, 40 Hours, 5pm – 9pm Weeknights 7am – 3:30pm Weekends, Instructor: Cary Hargrove
  • April 22nd – 25th Conveyor/Monorail Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Pat House

May

  • May 20th – 24th OSHA 30 Mon – Fri, 30 Hours, 7:30am – 4pm, Instructor: Sid Nelson
  • May 21st, 23rd Scaffold Refresher Tues & Thurs, 8 Hours, 5pm – 9pm, Instructor: Cary Hargrove

June

  • June 8th Aerial Lift Sat, 8 Hours, 7am – 3:30pm, Instructor: Cary Hargrove

July

  • July 15th – 18th Rigging Refresher Mon – Thurs, 12 Hours, 5pm – 9pm Test Thurs, Instructor: Sid Nelson

August

  • August 5th – 8th Optics Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Pat House
  • August 20th, 22nd, 24th, 27th, 29th, 31st, September 3rd & 5th Scaffold Erector Tues, Thurs & Sat, 40 Hours, 5pm – 9pm Weeknights 7am – 3:30pm Weekends, Instructor: Cary Hargrove

October

  • October 15th & 17th Scaffold Refresher Tues & Thurs, 8 Hours, 5pm – 9pm, Instructor: Cary Hargrove
  • October 28th & 29th First aid/cpr/aed Mon & Tues, 8 Hours, 5pm – 9pm, Instructor: Sid Nelson

November

  • November 9th Aerial Lift Sat, 8 Hours, 7am – 3:30pm, Instructor: Cary Hargrove
  • November 4th – 7th Reading Mechanical Prints Mon – Thurs, 16 Hours, 5pm – 9pm, Instructor: Pat House

Click Below To Download The 2019 Training Schedule:

2019 Training Schedule

Success Stories

Apprentice

“Let the reward
be your focus.”

– Greg Coatley, Louisville, KY
Read Greg’s Story

Journeyman

“The ability to work toward retirement is a big thing.”

– Nick Brunner, Louisville, KY
Read Nick’s Story

Journeyman

“I couldn’t have made a better career choice.”

– Dave Stewart, Merrillville, IN
Read Dave’s Story